sniffit - configuration file for sniffit (name arbirtary)
This page describes the format for the config file for sniffit (see sniffit(8) ). This file allows you to specify in great detail witch packets should be processed by snif fit. This file also controls (or will control) some func tions for the continuous logging ('-L' option). A sniffit config file might look like (Be sure to end it with a BLANK line): # Sniffit Sample Config file -- Brecht Claerhout logfile /var/adm/sniffit.today.log # First select all packets! select both mhosts 1 select both mhosts 2 # Now deselect all packets from/to those damn 'surfers' deselect both port 80 deselect both port 8001 This file will tell sniffit to process all packets on the subnet except those FROM/TO ports 80 and 8001 (thus we don't want logs of those mass WWW connections witch turn our logs unreadable).
The file consists of lines, lines are formed by fields, fields are separated with SPACES (NO TABS). Unix comment lines (starting with '#' are allowed). So this gives us: <field1> <field2> <field3> <field4> <field5>
<field1> select - Sniffit will look for packets that match the following description (other fields) deselect - Sniffit will ignore packets that match the description logfile - change the logfile name to <field2> instead of the default 'sniffit.log' <field2> from - Packets FROM the host matching the following desc. are considered. to - similar, Packets TO the.... both - similar, Packets FROM or TO the.... a filename - as an argument of 'logfile' in <field1> <field3> host - The (de)selection criteria involves a host name. port - similar, ... a portnumber mhosts - The (de)selection criteria involves multi ple-hosts, like with the wildcars in 0.3.0, but without the 'x' <field4> Either a hostname, a portnumber, a service name or a numbet-dot partial notation indicating multiple hosts depending on <field3> (service names like 'ftp' are resolved as the services available pre sent on the host that runs Sniffit, and translated into a port nr) <field5> A portnumber, if <field3> was 'host' or 'mhosts' (optional, if not filled in, all ports are going to be (de)selected)
The config file is interpreted SEQUENTIAL, so watch it, don't mix lines in a file. Example: select both mhosts 100.100.12. deselect both port 80 select both host 100.100.12.2 This file will get you the packets: a) Send by hosts '100.100.12.*' b) EXCEPT the WWW packets c) BUT showing the WWW packets concerning 100.100.12.2 select both mhosts 100.100.12. select both host 100.100.12.2 deselect both port 80 Will give you the packets (probably unwanted result): a) Send by hosts '100.100.12.*' b) Send from/to 100.100.12.2 (useless line) c) deselecting all WWW packets on the subnet
Brecht Claerhout <email@example.com>
Man(1) output converted with man2html